Additional comments, checks, warning messages, and diagnostic
information is printed out when the client starts.

We assume IPv4 is always present and enabled. We assume IPv6 is not
supported when it is disabled at the command line or when it is not
supported by the firewall method. Warn if IPv6 is disabled but the
user specified IPv6 subnets, IPv6 DNS servers, or IPv6 excludes that
are effectively ignored.

Instead of indicating which features are on/off, we also indicate if
features are available in the verbose output.

We also more clearly print the subnets that we forward, excludes, and
any redirected DNS servers to the terminal output.

These changes should help handling bug reports and make it clearer to
users what is happening. It should also make it more graceful when a
user specifies a subnet/exclude with hostname that resolves to both
IPv4 and IPv6 (but IPv6 is disabled in sshuttle).

The list of subnets to route over VPN and the list of subnets to
exclude are parsed in option.py parse_subnetport(). Hostnames or IP
addresses are supported. If a hostname was provided, only the first IP
address was considered. This could result in some traffic not
traversing the VPN that the user might expect should traverse it from
the arguments passed to sshuttle.

This patch makes the function handle all of the IPs if a hostname is
provided. If a user provides a hostname with a CIDR mask, problems can
occur and we warn the user about the issue.

If the user includes a hostname with both an IPv4 and an IPv6 address,
and the underlying method doesn't support IPv6, then this patch will
cause sshuttle to fail. I plan to provide a future patch where failure
won't occur if the only place IPv6 addresses appear is in the exclude
list. In that case it should be safe to ignore the IPv6 address.

This patch also changes parse_ipport() which is used by the --to-ns
option. If the user provides a hostname here, we just use the first IP
from the hostname and warn the user that only one is being used.

Include sshuttle version in verbose output.

Some bug reports include verbose sshuttle output but lack the version
that is being used. Including the sshuttle version in the output may
make it easier to handle future bug reports.

Add psutil as dependency in setup.py

Bump flake8 from 3.8.3 to 3.8.4

Bump pytest from 6.1.0 to 6.1.1

Bumps [flake8](https://gitlab.com/pycqa/flake8) from 3.8.3 to 3.8.4.
- [Release notes](https://gitlab.com/pycqa/flake8/tags)
- [Commits](https://gitlab.com/pycqa/flake8/compare/3.8.3...3.8.4)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Bumps [pytest](https://github.com/pytest-dev/pytest) from 6.1.0 to 6.1.1.
- [Release notes](https://github.com/pytest-dev/pytest/releases)
- [Changelog](https://github.com/pytest-dev/pytest/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/pytest-dev/pytest/compare/6.1.0...6.1.1)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Bump pytest from 6.0.2 to 6.1.0

Bumps [pytest](https://github.com/pytest-dev/pytest) from 6.0.2 to 6.1.0.
- [Release notes](https://github.com/pytest-dev/pytest/releases)
- [Changelog](https://github.com/pytest-dev/pytest/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/pytest-dev/pytest/compare/6.0.2...6.1.0)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Bump pytest from 6.0.1 to 6.0.2

Bumps [pytest](https://github.com/pytest-dev/pytest) from 6.0.1 to 6.0.2.
- [Release notes](https://github.com/pytest-dev/pytest/releases)
- [Changelog](https://github.com/pytest-dev/pytest/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/pytest-dev/pytest/compare/6.0.1...6.0.2)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Fix #494 sshuttle caught in infinite select() loop.

Bump attrs from 20.1.0 to 20.2.0

Improve detection of when the ssh process exits in both daemon and
foreground modes. Previously, sshuttle could infinite loop with 100%
cpu usage if the ssh process died. On machines that use suspend, the
ssh connection might not resume after wakeup. Now, this situation is
detected and sshuttle exits. The fix involves changing the return
value we check for when we call poll() and using a psutil function to
detect when the process exits if we are running sshuttle as a daemon.

Bumps [attrs](https://github.com/python-attrs/attrs) from 20.1.0 to 20.2.0.
- [Release notes](https://github.com/python-attrs/attrs/releases)
- [Changelog](https://github.com/python-attrs/attrs/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/python-attrs/attrs/compare/20.1.0...20.2.0)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Fix python2 server compatibility

Python2 ignores the byte string qualification (b’foo’)  but falls over for the combination rb for this regexp. Switching the qualification to br appears to fix this and works in both python2 and python3.

Fixed typo.

Fixes  #469. We replace python3 exclusive code with a check for python3 and a compatibility fix. Note that the switch from os.set_nonblocking to fcntl.fcntl in 98d052d1 (fixing #503) also fixes python2 compatibility.

Change license text to LGPL-2.1

Bump attrs from 19.3.0 to 20.1.0

Bumps [attrs](https://github.com/python-attrs/attrs) from 19.3.0 to 20.1.0.
- [Release notes](https://github.com/python-attrs/attrs/releases)
- [Changelog](https://github.com/python-attrs/attrs/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/python-attrs/attrs/compare/19.3.0...20.1.0)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

allow Mux() flush/fill to work with python < 3.5

Bump pytest-cov from 2.10.0 to 2.10.1

Bumps [pytest-cov](https://github.com/pytest-dev/pytest-cov) from 2.10.0 to 2.10.1.
- [Release notes](https://github.com/pytest-dev/pytest-cov/releases)
- [Changelog](https://github.com/pytest-dev/pytest-cov/blob/master/CHANGELOG.rst)
- [Commits](https://github.com/pytest-dev/pytest-cov/compare/v2.10.0...v2.10.1)
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>

Fixes: #503